POUPC 5039 Ash-free Additive package for hydraulic oils
Descripción
POUPC 5039 Ash-free Additive package for hydraulic oils
Production Introduction：
As a new additive package for hydraulic oils, POUPC 5039 can be used in formulation of high pressure anti-wear hydraulic oil, with the treat level of 0.6-0.8%. The finished hydraulic fluids can meet all requirements of ISO11158-97,Vickers m-2950-s DIN 51524(ll) and Cincinnati Milacron P-68P-69 P-70.
Typical properties：
Item Standards Test results Testing Method
Density（20℃）g/cm3 1.0-1.1 1.06 GB/T2540
Viscosity 40 OC, mm2/s 25-40 30.45 GB/T265
Flashing Point (COC) ℃ ≥105 148 GB/T3536
Sulfur % 6.5-8.0 7.24 SH/T0303
Phosphor ≥ 3.0~4.0 3.21 SH/T0296
Property and Usage:
Without any metal element contents, the product can offer high-pressure anti-wear property and thermal oxidization stability. With this product, the hydraulic oil can meet up the standards of plunger bump pressure of 30.0Mpa and valve pump pressure of 14.0-17.5Mpa. The finished hydraulic fluids are widely used in metallurgy, plastics, mineral and heavy machinery equipments including loader, excavator, dumpcar, shaper, etc.
Package and storage:
For this product, handling temperature should not exceed 60℃, and when for a long-time storage, temperature should not exceed 45℃. The product is packaged in 200L galvanized steel drum (200kg net weight). For further information, please refer to the relevant MSDS.
Production Introduction：
As a new additive package for hydraulic oils, POUPC 5039 can be used in formulation of high pressure anti-wear hydraulic oil, with the treat level of 0.6-0.8%. The finished hydraulic fluids can meet all requirements of ISO11158-97,Vickers m-2950-s DIN 51524(ll) and Cincinnati Milacron P-68P-69 P-70.
Typical properties：
Item Standards Test results Testing Method
Density（20℃）g/cm3 1.0-1.1 1.06 GB/T2540
Viscosity 40 OC, mm2/s 25-40 30.45 GB/T265
Flashing Point (COC) ℃ ≥105 148 GB/T3536
Sulfur % 6.5-8.0 7.24 SH/T0303
Phosphor ≥ 3.0~4.0 3.21 SH/T0296
Property and Usage:
Without any metal element contents, the product can offer high-pressure anti-wear property and thermal oxidization stability. With this product, the hydraulic oil can meet up the standards of plunger bump pressure of 30.0Mpa and valve pump pressure of 14.0-17.5Mpa. The finished hydraulic fluids are widely used in metallurgy, plastics, mineral and heavy machinery equipments including loader, excavator, dumpcar, shaper, etc.
Package and storage:
For this product, handling temperature should not exceed 60℃, and when for a long-time storage, temperature should not exceed 45℃. The product is packaged in 200L galvanized steel drum (200kg net weight). For further information, please refer to the relevant MSDS.
Datos del Vendedor
PACIFIC UNITED (BEIJING) PETROLEUM CHEMICAL CO., LTD.
Miembro Gratis desde 08/08/2013
Consultar Gratis
Productos Relacionados
